STAP08DP5XTTR

STMicroelectronics
511-STAP08DP5XTTR
STAP08DP5XTTR

Fabrikant:

Omschrijving:
LED-displaydrivers Low voltage 8-bit constant current LED sink driver with output error detection f

ECAD-model:
Download de gratis bibliotheeklader om dit bestand voor uw ECAD-hulpmiddel om te zetten. Meer informatie over het ECAD-model.

In voorraad: 17.532

Voorraad:
17.532 Kan onmiddellijk worden verzonden
Fabriekslevertijd:
24 weken De geschatte productietijd in de fabriek voor meer dan de weergegeven hoeveelheden.
Minimum: 1   Veelvouden: 1
Eenheidsprijs:
€ -,--
Ext. Prijs:
€ -,--
Est. Tarief:
Verpakking:
Op hele Spoel (Bestel in veelvouden van 2500)

Prijsbepaling (EUR)

Hvh. Eenheidsprijs
Ext. Prijs
Gesneden tape / MouseReel™
€ 1,16 € 1,16
€ 0,843 € 8,43
€ 0,763 € 19,08
€ 0,677 € 67,70
€ 0,635 € 158,75
€ 0,611 € 305,50
€ 0,59 € 590,00
Op hele Spoel (Bestel in veelvouden van 2500)
€ 0,554 € 1.385,00
† € 5,00 MouseReel™-bewerkingskosten worden in uw winkelwagen toegevoegd en berekend. Het is niet mogelijk om MouseReel™-bestellingen te annuleren of te retourneren.

Productkenmerk Kenmerkwaarde Selecteer kenmerk
STMicroelectronics
Productcategorie: LED-displaydrivers
RoHS:  
8 Digit
TSSOP-16
16 mA
SMD/SMT
- 40 C
+ 150 C
STAP08DP05
AEC-Q100
Reel
Cut Tape
MouseReel
Merk: STMicroelectronics
Hoog-niveau-uitgangsstroom: 1 mA
Laag-niveau-uitgangsstroom: - 1 mA
Werkvoedingsspanning: 3.3 V
Producttype: LED Display Drivers
Verpakkingshoeveelheid af fabriek: 2500
Subcategorie: Driver ICs
Gewicht per stuk: 173 mg
Gevonden producten:
Vink tenminste één selectievakje aan om vergelijkbare producten te tonen
Vink tenminste één selectievakje aan om vergelijkbare producten in deze categorie te tonen.
Geselecteerde attributen: 0

TARIC:
8542399000
CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
MXHTS:
8542399901
ECCN:
EAR99

STAPxxDPS05 LED Display Drivers

STMicroelectronics STAP08DP05, STAP16DPPS05, and STAP16DPS05 LED Display Driver ICs are monolithic, low voltage, low current power 8-bit or 16-bit shift registers designed for LED panel displays. Each device contains either an 8-bit or 16-bit serial-in, parallel-out shift register that feeds an 8-bit or 16-bit D-type storage register. In the output stage, eight or sixteen regulated current sources are designed to provide 5mA to 100mA (3mA to 40mA for the STAP16DPPS05) constant current to drive the LEDs. The detection circuit checks 3 different conditions that can occur on the output line: short to GND, short to VO or open line. The data detection results are loaded in the shift register and shifted out via the serial line output. The 3.3V of voltage supply is very useful for applications that interface any microcontroller from 3.3V.