ST-LINK/V2 In-Circuit Debuggers/Programmers

STMicroelectronics ST-LINK/V2 In-Circuit Debuggers/Programmers are designed for the STM8 and STM32 microcontrollers. The Single-Wire Interface Module (SWIM) and JTAG/Serial Wire Debugging (SWD) interfaces are used to communicate with the STM8 or STM32 microcontroller on an application board. The ST-LINK/V2-ISOL features digital isolation between the PC and the target application board and withstands voltages up to 1000Vrms. These in-circuit programmers feature 1.65V to 5.5V application voltage range support on the SWIM interface and 1.65V to 3.6V application voltage range support on JTAG/SWD interface. The ST-LINK/V2 programmers include a USB 2.0 full-speed compatible interface and a USB Type-A to Mini-B cable.

Resultaten: 2
Selecteren Afbeelding Onderdeelnummer
 Fabrikant
Omschrijving Gegevensblad Beschikbaarheid Prijsbepaling (EUR) De resultaten in de tabel met eenheidsprijs filteren op basis van uw hoeveelheid.
Hvh. RoHS Product
Hulpmiddel is alleen voor de evaluatie van
Kern
Werkvoedingsspanning
STMicroelectronics Programmeurs - Processor gebaseerd STM8S STM32 Programr 5V USB 2.0 JTAG DFU
Gegevensblad
2.336In voorraad
1.788Verwacht 2-3-2026
Min.: 1
Veelv.: 1
Max.: 50

In-Circuit Programmers STM8, STM32 ARM, STM8 5 V
STMicroelectronics Programmeurs - Processor gebaseerd ST-LINK Debugger STM8 STM32 DIG ISO
Gegevensblad
349In voorraad
Min.: 1
Veelv.: 1
Max.: 25

In-Circuit Programmers STM8, STM32 ARM, STM8 5 V