NUD4700 LED Shunts

onsemi NUD4700 LED Shunts are designed to be used with 1W LEDs (nominally 350mA @ 3V). These shunts provide a current bypass in the case of a single LED going into an open circuit. The NUD4700 LED shunts automatically reset themselves if the LED is replaced or the shunt is healed. These shunts feature a typical ON-state voltage of 1V and an OFF-state current of less than 250µA. The NUD4700 LED shunts are AEC-Q101 qualified and PPAP capable. These shunts are Pb and halogen/BFR-free and are RoHS compliant. Typical applications include LEDs where preventive maintenance is non-practical, LED headlights, LEDs with high reliability requirements, and crowbar protection for open-circuit conditions.

Resultaten: 2
Selecteren Afbeelding Onderdeelnummer
 Fabrikant
Omschrijving Gegevensblad Beschikbaarheid Prijsbepaling (EUR) De resultaten in de tabel met eenheidsprijs filteren op basis van uw hoeveelheid.
Hvh. RoHS ECAD-model Reeks
Doorslagspanning
Doorlaatspanning
Nominale terugkerende spanning in blokkeertoestand VDRM
Verpakking / doos
Verpakken
onsemi LED Beschermproducten SCR SHUNT IN POWERMITE
Gegevensblad
2.320In voorraad
Min.: 1
Veelv.: 1
Spoel: 3.000

NUD4700 5.5 V 1.2 V 10 V POWERMITE-2 Reel, Cut Tape
onsemi LED Beschermproducten SCR Shunt
Gegevensblad
50.086In voorraad
MouseReel beschikbaar
Min.: 1
Veelv.: 1
Spoel: 3.000

NUD4700 7.5 V 1.2 V 10 V PowerMITE-2 Reel, Cut Tape, MouseReel