TPS546E25RXXR

Texas Instruments
595-TPS546E25RXXR
TPS546E25RXXR

Fabrikant:

Omschrijving:
Schakelende spanningsregelaars 4V to 18V input 50A stackable PMBus sy

Levenscyclus:
Nieuw product:
Nieuw van deze fabrikant.
ECAD-model:
Download de gratis bibliotheeklader om dit bestand voor uw ECAD-hulpmiddel om te zetten. Meer informatie over het ECAD-model.

In voorraad: 2.212

Voorraad:
2.212 Kan onmiddellijk worden verzonden
Fabriekslevertijd:
18 weken De geschatte productietijd in de fabriek voor meer dan de weergegeven hoeveelheden.
Minimum: 1   Veelvouden: 1
Eenheidsprijs:
€ -,--
Ext. Prijs:
€ -,--
Est. Tarief:
Verpakking:
Op hele Spoel (Bestel in veelvouden van 3000)

Prijsbepaling (EUR)

Hvh. Eenheidsprijs
Ext. Prijs
Gesneden tape / MouseReel™
€ 8,45 € 8,45
€ 6,33 € 63,30
€ 6,04 € 151,00
€ 5,24 € 524,00
€ 5,01 € 1.252,50
€ 4,57 € 2.285,00
€ 4,02 € 4.020,00
Op hele Spoel (Bestel in veelvouden van 3000)
€ 3,91 € 11.730,00
† € 5,00 MouseReel™-bewerkingskosten worden in uw winkelwagen toegevoegd en berekend. Het is niet mogelijk om MouseReel™-bestellingen te annuleren of te retourneren.

Productkenmerk Kenmerkwaarde Selecteer kenmerk
Texas Instruments
Productcategorie: Schakelende spanningsregelaars
RoHS:  
SMD/SMT
WQFN-37
Buck
400 mV to 5.5 V
50 A
1 Output
4 V
18 V
10 mA
2 MHz
- 40 C
+ 125 C
TPS546E25
Reel
Cut Tape
MouseReel
Merk: Texas Instruments
Ontwikkelingskit: TPS546E25EVM-1PH
Ingangsspanning: 4 V to 18 V
Vochtgevoelig: Yes
Producttype: Switching Voltage Regulators
Uitschakeling: Shutdown
Verpakkingshoeveelheid af fabriek: 3000
Subcategorie: PMIC - Power Management ICs
Voedingsspanning - Min: 4 V
Gevonden producten:
Vink tenminste één selectievakje aan om vergelijkbare producten te tonen
Vink tenminste één selectievakje aan om vergelijkbare producten in deze categorie te tonen.
Geselecteerde attributen: 0

Voor deze functionaliteit moet JavaScript zijn ingeschakeld.

CNHTS:
8542399000
USHTS:
8542390070
MXHTS:
8542399999
ECCN:
EAR99

TPS546E25 50A Synchronous Buck Converter

Texas Instruments TPS546E25 50A Synchronous Buck Converter is a highly integrated buck converter with D-CAP4 control topology for a fast transient response. All programmable parameters can be stored in NVM as the new default values and be configured by the PMBus® interface to reduce the external component count. Pin-strap options allow for configuration as secondary or primary, stack position and stack number, overcurrent limit, fault response, DCM (single phase only) or FCCM, internal or external feedback resistor, switching frequency, output voltage selection or range, and compensation.